Overcurrent Protection; Battery Specifications; Battery Runtime - HP T700 series User Manual

Overcurrent Protection

Table C-5: Overcurrent Protection
UPS Model
T700 NA
T700 JPN
T700 H INT'L

Battery Specifications

Table C-6: Battery Specifications
Feature
Type
Voltage
Charging

Battery Runtime

Table C-7: Estimated Battery Runtime
Load (VA)
200
300
500
600
700
Note: Battery times are approximate and may vary depending on the load configuration and battery
charge.
Before connecting devices, verify that the UPS will not overload by checking that the rating
of the devices does not exceed the capacity of the UPS.
After verifying that the UPS will not overload, connect the power cords from the devices to
the appropriate output receptacles of the UPS.
HP Uninterruptible Power System T700 Models User Guide
HP CONFIDENTIAL Codename: Sherman7 Part Number: 215420-002 Last Saved On: 10/4/02 10:28 AM
Specification
Sealed lead-acid; maintenance-free
24-V Battery String
HP recommends 24 hours to allow full charge
Less than 3 hours to 90 percent capacity at default nominal utility voltage and no load
Load (Watts)
128
192
320
402
500
Input Protection
Input Overload Protector
Input Overload Protector
Input Overload Protector
Estimated Battery Runtime (Minutes)
38
27
14
9
6
Specifications
C-3