Overview; Ups Features; Communications Port; Network Transient Protector - HP T700 series User Manual

This chapter contains a general overview of the HP UPS, including an introduction to the
model configurations, power management software, available hardware options, and
warranties. Read this chapter to become familiar with the features of the UPS before
operating the unit.

UPS Features

The following features make this UPS versatile and easy to use:
•
Communications port for data exchange with the host computer
•
Network Transient Protector (for network surge protection)
•
Power protection for loads up to 700 VA/500 W
•
Support for UPS power management software

Communications Port

The UPS includes a communications port for data exchange with a host computer.

Network Transient Protector

The UPS includes a Network Transient Protector (NTP) that provides surge protection for
connected communication devices.

Overcurrent Protection

The UPS features overcurrent protection provided through input overload protectors located
on the UPS rear panel.
HP Uninterruptible Power System T700 Models User Guide
HP CONFIDENTIAL Codename: Sherman7 Part Number: 215420-002 Last Saved On: 10/4/02 10:27 AM
CAUTION: Use only the specific cable supplied with the UPS to connect the communications
port to the host computer.
CAUTION: To avoid damaging the equipment, do not connect the Network Transient
Protector to a digital PBX line. Connect either to an analog phone line or to a network.
1

Overview

1-1