Chapter 5 Basic; Print Size And Page Size; Creating A Custom Page Size - Kyocera TASKalfa 3010i Driver Manual

Print Size and Page Size

Creating a Custom Page Size

1
5-1
5 Basic
In the Basic tab, you can specify the most commonly used printer driver
settings.
To return to the original settings, click Reset. The Reset button is available
when accessing the printer driver from the application's Print dialog box.
Print size controls the output page size of the document. To use this setting,
ensure that the Page Sizes setting matches the page size setting in your
application. If the Print size is different from the page size in your application,
then each page is enlarged or reduced to match the Print size. The percentage
value shown in brackets indicates the size of the Print size setting relative to
the Page Sizes setting. If the Page Sizes does not match the page size setting
in the application (the size of the original) then, in most cases the Print size is
ignored and the document is printed based on its original size.
You can create a page size with your chosen dimensions for printing on non-
standard size paper. You can then save the custom setting to the Page Sizes
and Print size lists for later selection.
Custom page size displays the unit of measurement in inches or millimeters.
You can change the Units setting in the User Settings dialog box, accessed
from Device Settings.
In Basic > Print size, select Custom.
User Guide