Maintaining Your Printer
Updating if your printer is connected to a computer with MAC OS
Checking ink levels
Resetting factory defaults
100
To update the software:
1. Make sure that your computer is connected to the Internet.
2. Open Home Center Software.
3. Select the Tools tab.
4. Click Check for Software Updates.
5. If there are updates, follow the on-screen instructions.
To update the firmware:
1. Make sure that your computer is connected to the Internet.
2. Connect the printer to the computer with a USB cable or wirelessly (if not
currently connected).
3. Open Home Center Software.
4. Select the Tools tab.
5. Click Check for Printer (Firmware) Updates.
6. If there are updates, follow the on-screen instructions.
Do not turn off or unplug your printer or your computer during the update.
IMPORTANT:
Doing so may cause the printer to become inoperable. Your printer will
restart during the upgrade.
1. Press
.
2. Touch
, then Maintenance .
3. With Check Ink Levels selected, press.
The LCD shows approximate levels of ink in the cartridges so you know when it's
time to order replacement cartridges.
NOTE: You can order ink cartridges online. Go to
www.kodak.com/go/printingsupplies.
1. Press
.
2. Touch
, then Printer Settings .
3. Touch
, then Reset All Settings .
4. When you see the message, "This will reset printer settings to factory defaults.
Continue?," touch Yes .
NOTE: Resetting factory defaults does not change the date and time, language,
country/region, or network settings.
www.kodak.com/go/aiosupport