Av Interface; Displaying The Av I/F 1 Screen - Kenwood KVT-847DVD Instruction Manual

Monitor with dvd receiver
Hide thumbs Also See for KVT-847DVD:
Table of Contents

Advertisement

Control during DVD Video, DVD Audio or Video CD Playback

AV Interface

You can set audio and visual (AV) interface parameters.

Displaying the AV I/F 1 screen

AV Interface
AV I/F 1 screen
MENU
Navigation
4
1
5
3
AV-IN1 Name
6
2
AV-IN2 Interruption
7
AV-IN2 Name
8
1
AV I/F 1
AV I/F 1
AV I/F 1
60
|
English
1
RGB
5
VIDEO1
6
On
7
VIDEO2
8
1
9
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (page 74)
4 Calls the Setup Menu.
5 Selects a navigation system connection. (
"RGB":
Allows the Kenwood's Navigation System
to connect via its interface cable.
"AV-IN1": Allows a third-party navigation system to
connect via the AV INPUT1 port.
"Off":
Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
6 Sets a name to be displayed when you select a
system that is connected via the AV INPUT1 port.
(
VIDEO1)
• If you have set the navigation system connection to "AV IN1",
the display is fixed to "NAV".
7 Sets an image display of the system that is
connected via the AV INPUT2 port. (
"Off": When the image source is switched, an
image entered via the AV INPUT2 port is
displayed.
"On": When an image signal is entered via the AV
INPUT2 port, this image is displayed.
8 Sets a name to be displayed when you select an
image of the system that is connected via the AV
INPUT2 port. (
VIDEO2)
9 Displays the AV I/F 2 screen.
• If
is not shown, touch
AV Interface
to display it.
Next
RGB)
Off)
or
Prev.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kvt-837dvdKvt-867dvd

Table of Contents