Quiet Talk (Qt)/ Digital Quiet Talk (Dqt); Optional Signaling - Kenwood TK-7360 Instruction Manual

S
TUN
This function is used when a transceiver is stolen or lost. When the transceiver
receives a call containing a stun code, the transceiver becomes disabled. The
stun code is cancelled when the transceiver receives a call with a revive code.
• "STUN" appears on the display while the transceiver is stunned.
Q T (QT)/ D
UIET ALK
Your dealer may have programmed QT or DQT signaling on your transceiver
channels. A QT tone/ DQT code is a sub-audible tone/code which allows you to
ignore (not hear) calls from other parties who are using the same channel.
O S
PTIONAL IGNALING
Your dealer may also program several types of optional signaling for your
transceiver channels.
2-tone Signaling: 2-tone Signaling opens the squelch only when your
transceiver receives a call containing matching 2 tones.
DTMF Signaling: DTMF Signaling opens the squelch only when the transceiver
receives a call containing a matching DTMF code.
FleetSync Signaling: Refer to "S
MDC-1200: MDC-1200 is a data system using Audio Frequency Shift Keying
(AFSK). Transceivers communicate at a 1200 baud rate, using 1200 Hz and
1800 Hz tones.
O S
PERATOR ELECTABLE
You can change the preset encode and decode tones for the selected channel.
Up to 40 OST pairs can be pre-programmed by your dealer.
1 Select your desired channel.
2 Press the key programmed as OST.
• "TONE" appears on the display, followed by the current OST number.
3 Press / to select your desired OST number.
• You can also directly enter a number from 01 to 40 using the keypad.
4 Use the transceiver the same as in a regular call.
5 To exit OST mode and return to the preset encode/decode tones, press
10
SIGNALING
Q T
IGITAL UIET ALK
ELCALL
T (OST)
ONE
(DQT)
(S C
ELECTIVE ALLING
)" on page 10.
.