8. PORTEGE R600: Seat the memory module cover in place and secure it
with two screws.
PORTEGE A600: Seat the memory module cover in place and secure it
with one screw.
Take care to ensure that the memory module cover is firmly closed.
9. Install the battery pack - refer to
Chapter 6, Power and Power-Up Modes, if required.
10. Turn your computer over.
11. Turn the computer on and make sure the added memory is recognized
- to confirmed it, Start -> Control Panel -> System and Maintenance
-> System icon.
Removing a memory module
To remove the memory module, follow the steps as detailed below:
1. Shut down the computer - make sure the Power indicator is off (refer to
the
required).
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Close the display panel.
User's Manual
Figure 3-12 Seating the memory module cover (PORTÉGÉ R600)
Figure 3-13 Seating the memory module cover (PORTÉGÉ A600)
Turning off the power
Hardware, Utilities and Options
Replacing the battery pack
section in Chapter 1, Getting Started if
Screws
Memory
module cover
Screw
Memory
module cover
section in
3-25