7.
Gently press on the right upper corner (1) where the display hinge and top cover meet. Lift
around the edges of the top cover (2). Lift to remove the top cover (3).
When replacing the top cover, be sure that the following components are removed from the defective
top cover and installed on the replacement top cover:
Power button board and cable (see
●
Optical drive cable, (see
●
USB/audio board, (see
●
Reverse this procedure to install the top cover.
64
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Power button board on page
Optical drive on page
Hard drive on page
65).
69).
48).