Dreamup - Preparing Dreamup - DREAM MULTIMEDIA Dreambox DM7000S User Manual

Digital satellite receiver for free and encrypted dvb-tv programs with optional digital hard disk recording

Hide thumbs Also See for Dreambox DM7000S:

Table of Contents

43.1. DreamUp - Preparing DreamUp

Start the Software DreamUp2.14b on your PC.

Choose the COM Port, which is connected to the Dreambox.

Make shure the Checkbox „Use Network" is checked. If not, the Software connects only serial.

Type in the IP-Address from your PC „Local IP (PC)".

Type in an IP-Address „Remote IP (Box)" for the Dreambox, e.g. 10.0.0.97.

Make sure the IP-Address is not assigned to another Computer in your LAN, if the Dreambox is

connected over a Hub, Switch or Router with an normal Pathcable.

If you are using a Crossover Patchcable to connect, then the IP-Adddress is not that important, but it

must match to the chosen Subnetmask.

Dreamup is now prepared for flashing the image.

- 53 -

Table of Contents