Dreamup - Software Upgrade - DREAM MULTIMEDIA Dreambox DM7000S User Manual

Digital satellite receiver for free and encrypted dvb-tv programs with optional digital hard disk recording

Hide thumbs Also See for Dreambox DM7000S:

Table of Contents

43.

DreamUp - Software upgrade

!!!! Very important, please read this passage completely, before starting upgrading !!!!

Dreamup and the Images (Software) for the DM7000S are available at our Website

www.dm7000.com.

Remove all cables from the Dreambox.

Connect only the serial and the Patchcable.

The Mainspowercord is disconnected.

You need a Windows PC with a serial port (COM1 or COM2) and an Ethernet card. Connect the

Ethernet card with the Dreambox Communication port using a Crossover Patchcable. Connect the

serial ports with a serial nullmodem cable.

How to figure out the IP-Address in Windows (W98,W2K,XP) :

Click Start -> Run -> type in "Command" -> press Return.

A Dosbox opens. Type at the Dosprompt "ipconfig /all" and press Return. The IP-Address will be

listed. If you have more than one Ethernet adapter listed, then take the first adapter. If you don't see

an IP-Address, maybe you have no Ethernet card installed or configured. Refer to Windows Help or

consult a Technician for assistance.

Note the IP-Address and Subnetmask.

- 52 -

Table of Contents