Set Up Bandwidth Control; Set Up Qos For Internet Access - NETGEAR AC1200 JR6100 User Manual

2. Clear the Enable WMM check box for the band (2.4 GHz or 5 GHz).
3. Click the Apply button.

Set Up Bandwidth Control


To set up the maximum uplink bandwidth:
1. Select ADVANCED > Setup > QoS Setup.
2. Leave the Enable WMM check boxes selected.
3. To prioritize Internet traffic, select the Turn Internet Access QoS On check box.
4. To detect the current uplink bandwidth, click the Check button.
This helps you to determinate the maximum bandwidth setting.
5. Select the Turn Bandwidth Control On check box.
6. Use one of these methods to specify the maximum bandwidth:
• To use the current uplink bandwidth, select the Uplink bandwidth radio button. To
change the uplink bandwidth, enter the new uplink bandwidth in the Maximum field
and from the list, select either Kbps or Mbps.
• To check the Internet uplink bandwidth, select the Automatically check Internet
uplink bandwidth radio button and click the Check button.
7. Click the Apply button.

Set Up QoS for Internet Access

You can give prioritized Internet access to the following types of traffic:
• Specific applications
• Specific online games
• Individual Ethernet LAN ports of the router
• A specific device by MAC address
To specify prioritization of traffic, create a policy for the type of traffic and add the policy to the
QoS Policy table in the QoS Setup screen. For convenience, the QoS Policy table lists many
common applications and online games that can benefit from QoS handling.
AC1200 WiFi Router JR6100
Advanced Home Settings
40