NETGEAR AC1200 JR6100 User Manual page 42

10. Click the Apply button.
The rule is saved in the QoS Policy list.
The QoS Setup screen displays.
QoS for a Router LAN Port

To create a QoS policy for a device connected to one of the router's LAN ports:
1. Select ADVANCED > Setup > QoS Setup.
2. Select the Turn Internet Access QoS On check box.
3. Click the Set Up QoS Rule button.
4. Click the Add Priority Rule button.
5. From the Priority Category list, select Ethernet LAN Port.
6. In the QoS Policy field, enter the LAN port information.
7. From the Ethernet LAN Port list, select the number of the LAN port for which you want to
specify the priority level.
8. From the Priority list, select the priority for Internet access for this port's traffic relative to
other applications.
The options are Low, Normal, High, and Highest.
9. Click the Apply button.
The rule is saved in the QoS Policy list.
The QoS Setup screen displays.
10. Click the Apply button.
QoS for a MAC Address

To create a QoS policy for traffic from a specific MAC address:
1. Select ADVANCED > Setup > QoS Setup.
2. Click the Set Up QoS Rule button.
The QoS Setup screen displays.
3. Click the Add Priority Rule button.
AC1200 WiFi Router JR6100
Advanced Home Settings
42