Sewing - Dürkopp Adler 767 Operating Instructions Manual

8.

Sewing

This description is based on the following assumptions:
–
The machine is a single-needle machine fitted with the following optional
equipment:
- FA Thread Trimmer
- RAP Electro-pneumatic seam-locking and sewing-foot lift, pedal-operated
- FLP Electro-pneumatic sewing-foot lift, pedal-operated
- HP Electro-pneumatic rapid stroke adjustment
–
The following functions are set at the operating panel:
- starting or finishing lock-stitch : ON
- sewing-foot position before and after cutting: DOWN
- needle position before cutting: DOWN (1st position)
- needle position after cutting: UP (turn-back after starting 2nd position)
–
Main switch on.
–
The last sewing process was completed with finishing lock-stitch and thread cutter.
Operating and function sequence
1
Sewing process
Prior to sewing
Starting position
Position material correctly
for starting the seam.
Continued on next page !
26
2 3 4
Operation / Explanation
- Pedal in rest position
The machine is at a halt.
Needle up, sewing feet down.
- Press key 2.
The needle is fully lowered.
- Push pedal half-way back.
The sewing feet are raised.
- Push material forward until it touches the needle.
1 2 3 (4)