Ford Windstar Owner's Manual page 50

How to stop and restart the CD player
When a disc is loaded, the unit automatically enters the play
mode and the play indicator a illuminates. To stop
temporarily, press the "PLAY/STOP" button or the "AM/FM"
button. The stop indicator X in the display illuminates and
operation returns to the radio mode. To resume CD play, press
the "PLAY/STOP" button once again.
NOTE: If the ignition key is turned OFF during play and
then is set to the ON or ACCESSORY position, the
CD player will resume playing in the mode it was in
when ignition was turned off.
How to fast forward or reverse your CD player
To quickly search for a particular point in a selection, press the
"FF" button (to fast forward) or the "REV" button (to reverse).
While either button is pressed, the disc goes forward or
backward at two different speeds depending on how long the
button is held down. (Pressing either button for more than three
seconds will speed up the process.) Release the button at the
desired point (found by watching the elapsed playing time in
the display or by listening to the sound during fast forward or
reverse). When you have reached the beginning of track 1, the
CD player will begin playing.
When you have reached the end of the disc by keeping the fast
forward button pressed, the display will show "END" and the
player will go into pause mode. Push the "PLAY/STOP" button
to begin playing the first track of the disc, press the "REV"
button to back up from the end of the disc, or use the "SEEK"
function to locate a desired track.
Using the "SEEK" feature
Press the top ( a ) of the "SEEK" button once to repeat the
current playing selection. Press the bottom ( b ) of the "SEEK"
button to advance to the next selection.
Electronic Sound Systems
49