Ford Windstar Owner's Manual page 164

Refer to Figure 3 for steps 3-6.
Release the seatback by pulling the lever located at the back
3.
of the seat on the right hand side. Fold the seatback forward
and latch it in the down position (except for bench seat
equipped with built-in child safety seat).
Locate the seat latch handles at the rear of the seat near the
4.
floor. For the second row bench seat, lift the latch handles
up and rearward. For the third row bench seat, just lift the
latch handles. The latch hooks will disengage from the rear
floor attachments.
While still lifting the handles, lift seat at rear and rotate
5.
entire seat assembly forward, pivoting on the front floor
attachments. When the rear seat latches are clear of floor
attachments, release the latch handles.
Pull the seat rearward to disengage it from the front floor
6.
pins.
Seating and Safety Restraints
163