Loading; Documents; Parameters - Fujitsu fi-6670 Operator's Manual

Chapter 6 Consumables
2 Pull out the two Pick Rollers from the rotating shaft.
5
Attach new two Pick Rollers to the scanner.
1 Attach both of the two Pick Rollers to the rotating shaft.
Insert each roller so its socket will fit to the rotating shaft screw on
the scanner.
2 Close the Pick Roller Cover. Confirm that both sides of the cover
are locked firmly.
6
Attach the ADF Paper Chute.
7
Close the ADF.
Press down on the center of the ADF to return it to its original position
until the ADF clicks into place.
AUTION
Be careful, the ADF may close and pinch your
fingers.
• Do not close the ADF while the Pick Roller Cover is
kept open.
• Confirm that the Pick Rollers are attached firmly. If
not, paper feed errors such as paper jams will occur.
8
Reset the pick roller counter.
Start up the Software Operation Panel, and then reset the counter.
For details, refer to "Resetting the counters" (on page
TOP
Contents
Index
Introduction
Scanner
Overview

Loading

Documents

Scan

Parameters

Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
145).
Appendix
Glossary
104