RCA 25450 User Manual page 33

Delete? Delete?
Using Your RCA 25450 Phone System
NOTE: You can toggle between the Headset, Speakerphone and Handset/Receiver by pressing
the corresponding buttons or lifting the Handset/Receiver.
4. If the dialing prefix function is enabled via phone setting menu, the dialing
prefix will be inserted before the phone number entered.
5. Before the auto or manual line-selection dial is made, an incoming call takes
priority and will cancel the pre-dialing.
Redial (Base Unit)
The redial function allows the user to dial a number from the last 10 numbers dialed.
1. To redial a number, press the Redial button. The last phone number will be
displayed.
NOTE: If the Redial log is empty, the Redial display will show "Redial log empty" and return to
Standby Mode in 5 seconds.
2. Press 5 or 6 on the Navigation button to scroll through the last 10 numbers
dialed.
3. Press the Dial, Speaker or Headset (when a headset is plugged in) button, or pick
up the handset (off-hook) to make an auto line-selection dial; or press Line (1-4)
to make a manual line-selection dial. The phone number shown will be sent.
4. Before the auto or manual line-selection dial is made, an incoming call takes
priority and will cancel the redial.
To Delete a Number from the Redial Log (Base Unit)
1. Press the Redial Button. The last phone number will be displayed.
2. Press 5 or 6 on the Navigation button to scroll to the number to be deleted.
3. To delete a number from the Redial log, press the
the soft button to delete (a confirmation tone will sound) or the
soft button to keep it in the Redial log.
soft button. Press