When There Is A Problem Scanning Or Storing Originals - Ricoh MP C2003 Series User Manual

10. Troubleshooting
Messages
"Self checking..."
"XXX is not responding."
(This message may appear
while you are using the
Smart Operation Panel.
"XXX" in this message
indicates the function is
being used.)

When There Is a Problem Scanning or Storing Originals

Messages
"Cannot detect original size.
Select scan size."
226
Causes
The machine is performing
image adjustment
operations.
The machine is busy
processing data.
Causes
The machine failed to detect
the size of the original.
Solutions
The machine may perform periodic
maintenance during operations. The
frequency and duration of
maintenance depends on the humidity,
temperature, and printing factors such
as number of prints, paper size, and
paper type. Wait for the machine to
get ready.
To continue the current job, press
[Wait]. To stop the current job, press
[Force close].
Solutions
• Place the original correctly.
• Specify the scan size, and then
place the originals again. For
details about the settings for when
fax function is being used, see
"Scan Settings", Fax.
• When placing an original directly
on the exposure glass, the lifting/
lowering action of the exposure
glass cover or the ADF triggers
the automatic original size
detection process. Lift the
exposure glass cover or the ADF
30 degrees or more.