10. Troubleshooting
When You Have Problems Operating the
Machine
Problems
When the machine is turned
on, the only icon that
appears on the home screen
is the [Copier] icon. (When
using the standard operation
panel)
The machine has just been
turned on and the User Tools
screen is displayed, but the
User Tools menu has items
missing.
The indicator lamp remains
lit and the machine does not
enter Sleep mode even
though the [Energy Saver]
key was pressed.
The display is turned off.
Nothing happens when the
[Check Status] key or the
[Energy Saver] key is
pressed.
176
Causes
Functions other than the
copier function are not yet
ready.
Functions other than the
copier function are not yet
ready. Time required varies
by function. Functions
appear in the User Tools
menu when they become
ready for use.
In some cases, the machine
does not enter Sleep mode
when the [Energy Saver] key
is pressed.
The machine is in Sleep
mode.
The power is turned off.
Solutions
Wait a little longer.
Wait a little longer.
Before you press the [Energy Saver]
key, check that the status of the
machine does not prevent it from
entering Sleep mode. For details about
statuses that inhibit Sleep mode, see
"Saving Energy", Getting Started.
When using the standard operation
panel
Press the [Energy Saver] key or
the [Check Status] key to clear
Sleep mode.
When using the Smart Operation
Panel
Press the [Check Status] key to
clear Sleep mode.
Make sure the main power indicator is
off, and then turn on the power.