Cisco ASR 5000 Application Detection and Control Administration Guide Hardware Installation Manual page 31

Chapter 3 Router Hardware Description
Supported SFPs
Table 3-6
See the Cisco 1000 Series Connected Grid Routers Release Notes for the most recent information about
Note
supported hardware and software.
Table 3-6
Cisco Product ID
GLC-SX-MM-RGD
GLC-LX-SM-RGD
GLC-FE-100LX-RGD
GLC-FE-100FX-RGD
GLC-ZX-SM-RGD
Specifications
Specification
Connector type
Copper Interface
Fiber
Pinouts
Ethernet Ports
See
Ethernet Connections
The router supports the following Ethernet connection types:
•
•
•
OL-26438-02
lists the supported SFP modules.
Supported SFP Modules
Description
1000BASE-SX short wavelength; rugged
1000BASE-LX/LH long wavelength; rugged
100BASE-LX10 SFP
100BASE-FX SFP
1000BASE-ZX extended distance; rugged
Description
RJ-45
Full-duplex 10BASE-T, 100BASE-TX, 1000BASE-T
SFP modules:
1000 Mbps 8B/10B coding
•
100 Mbps 4B/5B coding.
•
See Connector and Cable Specifications
Figure 3-5 for Ethernet port locations
1000BASE-T—1000 Mbps full-duplex transmission over a Category 5 or higher shielded
twisted-pair (UTP) cable. Supports the Ethernet maximum length of 328 feet (100 meters).
100BASE-T—100 Mbps full-duplex transmission over a Category 5 or higher shielded twisted-pair
(UTP) cable. Supports the Ethernet maximum length of 328 feet (100 meters).
10BASE-T—10 Mbps full-duplex transmission over a Category 5 or higher shielded twisted-pair
(UTP) cable. Supports the Ethernet maximum length of 328 feet (100 meters).
Cisco 1120 Connected Grid Router Hardware Installation Guide
Hardware Features
3-13