Overlaying One Image Over Another [Form Overlay Mode] - Olivetti d-Copia 45 Operation Manual

Section 5 OTHER CONVENIENT FUNCTIONS

9. Overlaying one image over another [Form overlay mode]

This mode can be used to scan the first original (the "form") into
memory and have its image overlaid onto copies made from
subsequent originals. It is also possible to register and store in
memory, in advance, the images that you want to use as original
forms.
A
B
C
NOTE
Refer to "(2) Form registration" on page 6-1 for the procedure to
register images as forms.
1 Touch the "Function" tab. The content of the "Function" tab
will be displayed.
2 Touch the "Form Overlay" key. The "Form Overlay" screen
will be displayed.
Inch specifications
Ready to copy.
Select 2 sided/ Select
paper Separation original size
Reduce Auto
Exposure
/Enlarge Selection
Orig.image Margin
Page #
quality Centering
Sort/ Border
Cover
Finished Erase
Basic User choice Function
Metric specifications
Ready to copy.
Select 2-sided/ Select
paper
Split size orig.
Exposure Reduce/ Auto
Mode Enlarge selection
Image Margin/ Page
quality Image shift numbering
Sort/ Erase Cover
Finished Mode Mode
Function
Basic User choice
5-20
A
B
C
Paper size
Set
11x8 1 / "
2
Combine
Batch
Up
scanning
Form
Down
Overlay
Booklet
/Stitching
Program
Paper size
Set
Merge copy
Large # of
Up
originals
Form
Down
overlay
Booklet/
Stitching
Program
3 Touch the "On" key.
The screen to set the shading level of the form image will be
displayed.
Inch specifications
Ready to copy.
Form Overlay
Off
On
Metric specifications
Ready to copy.
Form overlay
Of
On
4 Touch the "+" key or the "-" key to select the level of shading
that you want to use for the original form.
The desired shading level can be set to any 10% increment
between 10% and 100%.
* A sample of the effect that the selected shading level will
produce will be displayed to the right of the entry field.
Inch specifications
Place from first then press start.
Form Overlay
(10~100)
50
Exposure %
Off
Scan form once
On
Metric specifications
Set form.
Press Start Key.
Form overlay
(10 100)
Exposure 50 %
Off
Scan form once
On
5 If you want to use a previously registered image as the form,
touch the "Form Selected" ["Form selection"] key and go to
the next step.
If you want to scan in a new image, go directly to step 9.
Paper size
Set
11x8 1 / "
2
Register Back Close
Use the first scanned image as a form
for copy after second original image.
Paper size
Set
Register Back Close
1 s t s c a n n e d i m a g e c a n b e u s e d a s a fo r m
fo r c o py a f t e r s e c o n d o r i g i n a l i m a g e.
Register Back Close
From
Selected
Register Back Close
From
selection