Menu Setting Procedures
5. RECORDING CONDITIONS SET
This sets the overwrite conditions and remaining disk capacity warning criteria for each recording
area.
NORMAL RECORDING AREA OVERWRITE
This specifies whether to stop recording or to
continue recording by overwriting images that are
currently recorded on the hard disk when the normal
recording area has become full.
1
Select [ON/OFF] from the menu.
• ON:
When the normal recording area becomes full,
images will begin to be overwritten automatically
from the start of the normal recording area.
• OFF: Recording will stop when the normal recording
area becomes full.
ALARM RECORDING AREA OVERWRITE
This specifies whether to stop recording or to
continue recording by overwriting images that are
currently recorded on the hard disk when the alarm
recording area has become full.
1
Select [ON/OFF] from the menu.
• ON:
When the alarm recording area becomes full,
images will begin to be overwritten automatically
from the start of the alarm recording area.
• OFF: Recording will stop when the alarm recording
area becomes full.
REMAINING DISK WARNING
The buzzer can be set to sound a warning if the
NORMAL RECORDING AREA OVERWRITE and
ALARM RECORDING AREA OVERWRITE settings are
"OFF" and the remaining disk capacity becomes low
(see p. 25). The remaining disk area value at which a
warning will be given can be specified here.
1
Set the remaining disk area value from the menu.
Setting range: 1% to 10% (1% units)
If the OVERWRITE setting is "ON" for both
recording areas, no remaining area warning is
necessary, and so "**" is displayed and
REMAINING DISK WARNING cannot be set.
Click [SAVE] to complete the sub-menu settings (or changes).
English
(Default setting: ON)
(Default setting: ON)
11