Controllers; Supported Hardware And Software; Configuration Guidelines And Restrictions; Global Cat3K Restrictions - Cisco TrustSec Configuration Manual

Notes for Catalyst 3000 and 2000 Series Switches
and WLC 5700 Series Wireless LAN Controllers
Revised: October 16, 2013, OL-22192-02

Supported Hardware and Software

For a complete table of features, platforms, and IOS images supported, see the latest Product Bulletins
at the following URL:
http://www.cisco.com/en/US/netsol/ns1051/index.html
See also, the Matrix of Cisco TrustSec-Enabled Infrastructure at the following URL:
http://www.cisco.com/en/US/solutions/ns170/ns896/ns1051/trustsec_matrix.html

Configuration Guidelines and Restrictions

Global Cat3K Restrictions

•
•
•
OL-22192-02
AAA for Cisco TrustSec requires RADIUS and is supported only by the Cisco Identity Services
Engine (Cisco ISE), Release1.2 with patches or more recent, and Cisco Secure Access Control
System (Cisco ACS), version 5.1 or more recent.
Default for Cisco Trustsec is disabled.
Default for SXP is disabled.
A P P E N D I X
Cisco TrustSec Configuration Guide
A
A-1