Cisco TrustSec Configuration Manual page 180

show cts role-based sgt-map
show cts role-based sgt-map
To display the SXP source IP to SGT bindings table (IP–SGT bindings), use the show cts role-based
sgt-map command in EXEC or privileged EXEC mode.
Syntax Description
ipv4_dec
ipv4_cidr
ipv6_hex
ipv6_cidr
host ipv4_decimal |
ipv6_hex
all
summary ipv4 | ipv6
vrf instance_name
Defaults None
Command Modes EXEC (>); Privileged EXEC (#)
Supported User Roles
Administrator
Command History Release
12.2 (33) SXI3
12.2 (50) SG7
12.2 (53) SE2
12.2 (53) SE2
Cisco TrustSec Configuration Guide
7-94
show cts role-based sgt-map {ipv4_dec | ipv4_cidr | ipv6_hex | ipv6_cidr | all [ipv4 | ipv6] |
host {ipv4_decimal | ipv6_dec} | summary [ipv4 | ipv6] |
vrf instance_name {ipv4_dec | ipv4_cidr | ipv6_dec | ipv6_cidr | all {ipv4 | ipv6} | host
{ipv4_decimal | ipv6_dec} |summary {ipv4 | ipv6} }
Specifies an IPv4 address in dot-decimal notation.
For example (208.77.188.166)
Specifies an IPv4 address range in Classless Inter-Domain Routing (CIDR)
For example, 35.0.0.0/8, where the /8 signifies that the 8 most significant bits
identify the networks, and the 24 least-significant bits, the hosts.
Specifies an IP version 6 address in hexadecimal separated by colons.
For example, 2001:db8:85a3::8a2e:370:7334.
Specifies a range of IPv6 address in hexadecimal CIDR notation.
Specifies mappings for a specific IPv4 or IPv6 host. Use dot decimal and hex
colon notation for IPv4 and IPv6 respectively.
Specifies all mappings to be displayed.
Summary of IPv4 or IPv6 mappings. Displays both IPv4 and IPv6 if you do
not specify a keyword.
Specify a VPN Routing/Forwarding instance for mappings.
Modification
This command was introduced on the Catalyst 6500 series switches.
This command was introduced on the Catalyst 4000 series switches
(without vrf keyword).
This command was introduced on the Catalyst 3750(E) and 3560(E) series
switches (without vrf keyword).
This command was introduced on the Catalyst 3750(X) series switches
(without vrf keyword).
Chapter 7 Cisco TrustSec Command Summary
OL-22192-01