Cisco TrustSec Configuration Manual page 165

Chapter 7 Cisco TrustSec Command Summary
show cts credentials
To display the TrustSec device ID, use the show cts credentials command in EXEC or privileged EXEC
mode.
Syntax Description This command has no commands or keywords.
Defaults
None
Command Modes
EXEC (>); Privileged EXEC (#)
Supported User Roles Administrator
Command History Release
12.2(33) SXI
Examples
Router# show cts credentials
CTS password is defined in keystore, device-id = r4
Related Commands Command
cts credentials
OL-22192-01
show cts credentials
Modification
This command was introduced on the Catalyst 6500 series switches.
Description
Specifies the TrustSec ID and password.
show cts credentials
Cisco TrustSec Configuration Guide
7-79