Configuration Overview
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Supported Hardware and Software
For a list of TrustSec supported hardware and software per TrustSec release, see,
Release Notes for Cisco TrustSec General Availability Releases at the following URL:
http://www.cisco.com/en/US/docs/switches/lan/trustsec/release/notes/rn_cts_crossplat.html
See also, the Release Notes, Configuration Guides, and Command References for your device.
Prerequisites for Cisco TrustSec
The following are the prerequisites for establishing a TrustSec network with Catalyst switches:
•
•
•
•
Cisco TrustSec Configuration Guide
2-2
Base configuration for the Wireless LAN Controller
Phased Deployment Overview
Monitor Mode
Migrating from Monitor Mode
Low Impact Mode
Closed Mode
ISE Profiling Services
ISE Base Configurations: Promiscuous VMware
Central Web Authentication
User Authentication and Authorization to Multiple Active Directory Domains
ISE Deployment Type and Guideline
Using Certificates to Differentiate Access
On-boarding and Provisioning
Server to Server Segmentation using Security Group Access
Deploying EAP Chaining with AnyConnect NAM and Cisco ISE
Failed Authentications & Authorizations
TrustSec software on all network devices
Connectivity between all network devices
Network availability of the Cisco Secure ACS 5.1, or Cisco ISE operating with a TrustSec license
Directory, DHCP, DNS, certificate authority, and NTP servers functioning in the network
Chapter 2
Configuring the Cisco TrustSec Solution
OL-22192-01