Ford Super Duty Owner's Manual page 40

Hide thumbs Also See for Super Duty:

Table of Contents

3. Provide enough lap belt length so that the tongue can reach the

Fastening the Cinch Tongue

WARNING: The lap belt should fit snugly and as low as possible

around the hips, not across the waist.

1. Pull the lap and shoulder belt from the retractor so that the shoulder

belt portion of the safety belt crosses your shoulder and chest.

2. Be sure the belt is not twisted. If the belt is twisted, remove the twist.

3. Insert the belt tongue into the proper buckle for your seating position

until you hear a snap and feel it latch.

4. Make sure the tongue is securely fastened to the buckle by pulling on

While you are fastened in the safety belt, the lap and shoulder belt with

a cinch tongue adjusts to your movement. However, if you brake hard,

turn hard, or if your vehicle receives an impact of 5 mph (8 km/h) or

more, the safety belt will become locked and help reduce your forward

2013 F-250/350/450/550 (f23)

Owners Guide gf, 1st Printing

Safety Belts

1. To lengthen the lap belt, pull

some webbing out of the shoulder

belt retractor.

2. While holding the webbing below

the tongue, grasp the tip (metal

portion) of the tongue so that it is

parallel to the webbing and slide the

tongue upward.