Ford Super Duty Owner's Manual page 379

378
Installing Dual Rear Wheel Ornaments
A
C
B
2013 F-250/350/450/550 (f23)
Owners Guide gf, 1st Printing
USA (fus)
Wheels and Tires
If the ornament retention towers
are aligned between the studs or lug
nuts, the ornament is improperly
installed. This improper installation
may appear and sound correct, but
will not keep the ornament on the
vehicle. Ornaments improperly
installed in this manner will fall off
or become loose with minimal force
or impact.
1. Align the ornament with the lug
nuts.
• (A) is the clip and (B) is the flange.
A B
2. Hold the ornament so that all of
the retention clips are sitting on the
flange of the lug nuts.
3. Use your hand or rubber mallet
to tap the ornament in a star
pattern. There should be an even
gap between the ornament and the
wheel.
D