Ford Super Duty Owner's Manual page 378

Note: The following steps apply to all vehicles:
1
6
4
8
2
10 1
3
5
7
2 9
19. Stow the flat tire. See Stowing the flat or spare tire if the vehicle is
equipped with a spare tire carrier.
20. Stow the jack, jack handle and lug wrench. Make sure the jack is
securely fastened so it does not rattle when driving.
21. Unblock the wheels.
The following step applies to F–250/F–350 Single Rear Wheel
(SRW) vehicles only:
2013 F-250/350/450/550 (f23)
Owners Guide gf, 1st Printing
USA (fus)
Wheels and Tires
18. Remove the jack and fully
tighten the lug nuts in the order
7
shown. See Wheel lug nut torque
specifications in this chapter for
the proper lug nut torque
3
specification.
8-lug nut torque sequence
5
10-lug nut torque sequence
8
6
4
22. When installing the wheel center
ornaments, ensure that the
ornament retention towers on the
back side of the ornament are
aligned with the studs or lug nuts.
The retention towers are designed
to be installed over the studs or
nuts and retain to the flange on the
lug nut.
377