GE EPM 5300 Instruction Manual page 81

MAX
MIN
LM1
LM2
KVAH KWH
MAX/MIN
VOLTS AMPS
LIMITS
Step 3:
a. Press AMPS once.
! Lower display is replaced with three dashes.
!Follow this step for DISABLING LIMITS:
MAX
MIN
LM1
LM2
KVAH KWH
MAX/MIN
VOLTS AMPS
LIMITS
Step 4:
a. Press AMPS once to Disable the Limit.
! The display blanks momentarily, then the disabled
settings appears in middle and lower displays.
! The Set Above/Below will be set to below.
! Trip Relay 1 will be disabled.
! Trip Relay 2 will be disabled.
! The Setup Level will be set to 0000.
GE Multilin
CHAPTER 12: GROUPS 4, 5, AND 6 – SET LIMITS AND RELAYS
AC VOLTS
A B C A B C
N N N B C A
AC AMPS
A C N
B
POWER
PF
KW
KVA
FREQ KVAR
PHASE
POWER
NEXT
AC VOLTS
A B C A B C
N N N B C A
AC AMPS
A B C N
POWER
PF
KW
KVA
FREQ KVAR
PHASE
POWER
NEXT
EPM 5000 series Advanced Power Meters
MAX
MIN
LM1
LM2
KVAH KWH
MAX/MIN
VOLTS
LIMITS
Step 5:
a. Press VOLTS to change current Set Above/Below,
Trip Relay 1, and Trip Relay 2 settings.
! This toggles the segments UP (above limit) or DOWN
(below limit).
b. Press AMPS to store.
c. Press VOLTS to toggle the second segment UP
(enable Relay 1) or DOWN (disable Relay 1).
d. Press AMPS to store.
e . Press MAX/MIN/LIMITS to proceed to entering the
limit value.
f. Press AMPS to store.
AC VOLTS
A B C A B C
N N N B C A
AC AMPS
A B C N
POWER
PF
KW
KVA
FREQ KVAR
PHASE
POWER
AMPS
NEXT
77