GE EPM 5300 Instruction Manual page 10

CHAPTER 2: MECHANICAL INSTALLATION
1.6875
Diagram 2.4: Optional Communication Converter or DC Output Module Installation
* Recommended wire gauge is 20 AWG for DC Output or RS-485 options.
Note: Carefully line up the guide screw and 8 pin port connector to prevent pin breakage.
6
SIDE VIEW
(4) 8-32 SCREWS
0.80
RECOMMENDED
CUTOUT
0.198 DIA.
4.0 DIA.
3.375
1.6875
3.375
Diagram 2.3: Standard cutout
W Port
EPM 5000 series Advanced Power Meters
FIRST PUT (16) PIN
CONNECTOR TOGETHER.
(2) 8-32 SCREWS WILL
LINE UP WITH 2 PEMS
ON THE BACK PLATE.
BACK VIEW
GE Multilin