Data Entry; Standard Numeric Data Entry - GE EPM 5300 Instruction Manual

CHAPTER 6: PROGRAMMING OVERVIEW
6.3: Programming Mode Data Entry
The EPM 5300P and EPM 5200P programming mode utilizes only three out of the five-keypad buttons:
the MAX/MIN/LIMITS, VOLTS/THD, and AMPS/THD buttons.
MAX/MIN
LIMITS
U
Note: The EPM 5200P uses the same keypad strokes and methods. Although the keypad may look
slightly different, the keys match the EPM 5300P exactly. In the interest of brevity, all keystrokes and
programming functions are shown using the EPM 5300P keyboard.
BUTTON FUNCTION
MAX/MIN/LIMITS ADVANCES
VOLTS/THD CHANGES
VALUE
AMPS/THD STORES

6.4: Standard Numeric Data Entry

Programmable FUNCTION values are always four digit numerical fields designed to accept any value
between 0000 and 9999 (a blank signifies a zero). When entering the value of a FUNCTION, enter all
four digits, leading zeros included. For instance, to enter the number 25, enter 0025.
38
VOLTS
AMPS
THD THD
P
SED FOR ROGRAMMING
DESCRIPTION
Scrolls GROUPS, FUNCTIONS and advances to exit point from
FUNCTION and GROUP level.
Scrolls PACKS, digit counters and changes switch PACK position UP or
DOWN.
Activates new data entry and enters or exits from GROUP or FUNCTION
level.
EPM 5000 series Advanced Power Meters
P
PHASE
POWER
NEXT
U
SED FOR
E
ASSWORD NTRY
GE Multilin