Schwinn SR23 Recumbent Bike Assembly Manual page 20

Step 11 Install Handlebar
Parts:
• Handlebar (Ref b)
• washer (Ref i-3)
• screw m8x1 (Ref i-5)
11-1 tuck the computer wires into the mast to allow insertion of
the Handlebar .
11-2 slide the Handlebar (b) into the mast and secure with the
console m8x1 screw (i-5) and washer (i-3) . (Figure A)
11-3 Pull the computer wires back up through the Handlebar as
shown. (Figure b)
B
I-5
Figure A
I-3
Figure B
17