Schwinn SR23 Recumbent Bike Assembly Manual page 19

Step 10 Install Handlebar Mast
Parts:
• Handlebar mast (Ref c)
tools:
• supplied Allen wrench
10-1 Remove the four Allen bolts (c-1) and curved washers (c-)
from the frame .
10-2 connect the upper and lower computer wires and Heart Rate
wires. (detail A)
10-3 insert the Handlebar mast (c) into the main unit.
10-4 Re-install the four Allen bolts and curved washers and
completely tighten.
Detail A
1
C
C-2
C-1