Other settings
Switching between PAL and NTSC signal formats
Set the video signal format to be output for the TV you are using.
• The factory setting is "PAL".
TUNER PRESET CH +, –
1
STATUS
DIMMER
Press and hold
and
"V.Format:<PAL>" appears on the display.
2
TUNER PRESET CH +
–
Press
,
and set the video signal format.
3
Press
iPod 1
to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the picture will not be displayed
properly.
BD
STATUS
DIMMER
iPod 1
for at least 3 seconds.
43