Denon AVR-1312 Owner's Manual page 21

n Listening to preset stations
1
SHIFT
Press to select the memory
block (A to G).
TUNER
Preset Channel
A8 FM 90.1MHz
A7 FM 90.1MHz
A6 FM 90.1MHz
A5 FM 90.1MHz
A4 FM 108.0MHz
A3 FM 98.1MHz
A2 FM 89.1MHz
A1 FM 87.5MHz
[TUNING / ] Tuning [ BAND ] Band [ MODE ] Mode
[ CH+/- ] Preset [MEMORY] Memory [SEARCH] RDS
2
Press CH + or CH – to select the desired preset channel.
You can also operate via the main unit. In this case, perform the
following operations.
TUNER PRESET CH + TUNER PRESET CH –
Press or
radio station.
BD
RDS (Radio Data System)
Note that the RDS function only works when receiving RDS compatible
stations.
RDS (works only on the FM band) is a broadcasting service which
allows a station to send additional information along with the regular
radio program signal.
NOTE
The operations described as follows using
SEARCH
will not function in areas in which
there are no RDS broadcasts.
to select a preset
n RDS search
Use this function to automatically tune to FM stations that provide
the RDS service.
1
2
[TUNING / ]
[ CH+/-
3
• If no RDS stations are found with the above operation, all the
reception bands are searched.
• When a broadcast station is found, that station's name appears on
the display.
• If no RDS station is found when all the frequencies have been
searched, "NO RDS" is displayed.
18
Tuning in radio stations
TUNER
Press to switch the input
source to "TUNER".
Press SEARCH to select "RDS".
TUNER
RDS
RDS RDS Station
PTY Program category
TP Traffic info.
RT Radio text
FM 87.50MHz
[SEARCH]Search Mode [CH+/-]Tuning
Tuning [ BAND ] Band [ MODE ] Mode
] Preset [MEMORY] Memory [SEARCH] RDS
CH + CH –
Press or .
The search for RDS stations begins automatically.