Denon AVR-1312 Owner's Manual page 43

• If you do not press any button for approximately 5 seconds, the menu screen light turns off.
Tone
Adjust the tonal quality of the sound.
1
TONE
Press .
Tone
Tone Control OFF
[ENTER] Enter
2
o p
Use to select "ON".
ON Allow tone adjustment (bass, treble).
OFF
Playback without tone adjustment.
NOTE
The tone cannot be adjusted in the direct mode.
3
Press ui to select an item to be set, and use
Bass Adjust low frequency range (bass).
• –6dB – +6dB (0dB)
Treble Adjust high frequency range (treble).
• –6dB – +6dB (0dB)
"Bass" or "Treble" can be set when "Tone Control" is set to "ON".
BD
around items indicate the settings made upon purchase.
[ ] Return
o p to select a setting value.
NIGHT MODE
Optimized setting for late-night listening.
NIGHT
Press to select your desired mode.
D.Comp:OFF
OFF Not set.
Low Set the adjusted value to "Low".
Mid Set the adjusted value to "Middle".
High Set the adjusted value to "High".
When a Dolby TrueHD signal is output, "DRC" is displayed on the TV screen.
The setting mode is also changed as shown below.
OFF Not set.
Low
Set the adjusted value to "Low".
Mid
Set the adjusted value to "Middle".
High
Set the adjusted value to "High".
Auto Automatic dynamic range compression on/off control according to the source.
40
Adjusting the sound field effects
around items indicate the settings made upon purchase.