Remote Control - Chamberlain HD920EV Manual

Remote Control

Your remote control has been programmed at the factory to operate with your garage door opener.
Older Chamberlain remote controls are NOT compatible, see page 47 for compatible accessories. Programming can be done through the door control or the learn button the garage door opener. To
program additional accessories refer to the instructions provided with the accessory or visit www.chamberlain.com. If your vehicle is equipped with a Homelink
depending on the make, model, and year of your vehicle. Visit www.homelink.com for additional information.
TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN USING THE MOTION-DETECTING CONTROL PANEL
1
Press the LEARN button on the
door control to enter
Programming Mode.
The command LED
will flash once.
TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN USING THE SMART CONTROL PANEL
1
Press the navigation button
below "MENU" to view the
Features menu.
2
Press the LEARN button
3
again, the LED will flash
once.
The command LED will
flash once again.
The garage door opener lights will flash (or two clicks will be heard) when the
code has been programmed. Repeat the steps for programming additional
remote controls or keyless entry devices.
2 3
Use the navigation buttons
to scroll to "PROGRAM".
Press to continue.
Press
Remote Control:
Press the button on the remote control that you wish to operate your garage
door.
Keyless Entry:
Enter a 4-digit personal identification number (PIN) of your choice on the
keyless entry keypad. Then press the ENTER button.
Select "REMOTE" or
4
Remote Control:
"KEYPAD" to program from
Press the button on the remote control that you wish to operate your
the program menu.
garage door.
to continue.
Keyless Entry:
Enter a 4-digit personal identification number (PIN) of your choice on
the keyless entry keypad. Then press the ENTER button.
TO REMOTE
The garage door opener lights will flash (or two clicks will be heard) when
the code has been programmed.
Repeat the steps for programming additional remote controls or keyless
entry devices. If programming is unsuccessful, program the remote using
the learn button.
39
®
, you may require an external adapter
OR
? ? ? ?
PIN
OR
? ? ? ?
PIN