Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Installation Manual
Advertisement
Table of Contents
Related Manuals for Bosch NBN-733
Summary of Contents for Bosch NBN-733
- Page 1 Camera Browser Interface NBN-733 / NDN-733 FW5.6 Software manual...
-
Page 3: Table Of Contents
Running recording program 3.1.10 Audio communication 3.1.11 Processor load Playback page 3.2.1 Selecting recordings for playback 3.2.2 Exporting tracks 3.2.3 Searching for tracks 3.2.4 Controlling playback Settings Overview Configuration Menu Settings Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... - Page 4 Time server type Display Stamping 6.4.1 Camera name stamping 6.4.2 Time stamping 6.4.3 Display milliseconds 6.4.4 Alarm mode stamping 6.4.5 Alarm message 6.4.6 Video watermarking Web Interface Appearance 7.1.1 Website language AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems...
- Page 5 8.1.2 Camera LED 8.1.3 Mirror image 8.1.4 Flip image 8.1.5 Button 'MENU' 8.1.7 Heater 8.1.8 Reboot device 8.1.9 Factory defaults 8.1.10 Lens Wizard Lens Wizard Mode menu 8.3.1 Current mode Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01...
- Page 6 Target bit rate 9.1.5 Maximum bit rate 9.1.6 Encoding interval 9.1.7 Standard definition video resolution 9.1.8 Expert Settings 9.1.9 Default Encoder Streams 9.2.1 H.264 settings 9.2.2 JPEG stream Encoder Regions 9.3.1 Regions AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems...
- Page 7 Video transmission 11.1.6 Stream 11.1.7 Remote port 11.1.8 Video output 11.1.9 Decoder 11.1.10 SSL encryption 11.1.11 Auto-connect 11.1.12 Audio 11.2 Video Content Analyses (VCA) 11.3 Audio Alarm 11.3.1 Audio alarm Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01...
- Page 8 VCA - Scheduled 12.3.1 Weekdays 12.3.2 Holidays 12.4 VCA - Event triggered 12.4.1 Trigger 12.4.2 Trigger active 12.4.3 Trigger inactive 12.4.4 Delay [s] Interfaces 13.1 Alarm input 13.1.1 Name 13.2 Relay AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems...
- Page 9 Network MSS [Byte] 14.1.13 iSCSI MSS [Byte] 14.1.14 Network MTU [Byte] 14.1.15 Enable DynDNS 14.1.16 Provider 14.1.17 Host name 14.1.18 User name 14.1.19 Password 14.1.20 Force registration now 14.1.21 Notification mail Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01...
- Page 10 14.6 IP V4 filter 14.7 Encryption Service 15.1 Maintenance 15.1.1 Update server 15.1.2 Firmware 15.1.3 Configuration 15.1.4 SSL certificate 15.1.5 Maintenance log 15.1.6 Upload history 15.2 Licenses 15.3 System Overview AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems...
-
Page 11: Browser Connection
In Windows Vista, deactivate protected mode on the Security tab under Internet Options. To play back live video images, an appropriate ActiveX must be installed on the computer. If necessary, install the Bosch Video Client. AM18-Q0635 | v5.6 | 2013.01... -
Page 12: Establishing The Connection
If you do not connect, the camera may have reached its maximum number of connections. Depending on the device and network configuration, each camera can have up to 25 web browser connections, or up to 50 connections via Bosch Video Client or Bosch Video Management System. 1.2.1... -
Page 13: System Overview
The LIVEPAGE is used to display the live video stream and control the camera. Recordings The PLAYBACK page is used for playing back recorded sequences. Settings The SETTINGS page is used to configure the camera and the application interface. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 14: Operation Via The Browser
The items shown depend on the settings on the LIVEPAGE Functions page. Figure 3.1 Livepage 3.1.1 Image selection Click a tab below the video image to display a camera image stream. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 15: Status Icons
Indicates a gap in the recorded video. Watermark flag Watermark is set on media item. Invalid watermark flag Indicates that the watermark is not valid. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 16: Cameras With Ptz Control
Click and hold for far focus; click and hold for near focus. Click and hold to close the iris; click and hold to open the iris. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 17: View Control Roi
To select a particular region of the image: Click and hold the arrows to move up and down, and from side to side through the image. Click and hold the center area to move in all directions. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 18: Cameras With Alarm And Relay I/O
The camera relay allows the operation of an external device (for example, a light or a door opener). To operate, click the relay symbol. – The symbol is red when the relay is activated. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 19: System Log / Event Log
Saving begins immediately. The red dot on the icon indicates that a recording is in progress. Click the recording icon again to stop recording. Play back saved video sequences using the Player from Bosch Security Systems. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 20: Running Recording Program
When accessing the camera with a browser, the processor load and network information is available in the upper right of the window next to the Bosch logo. Move the mouse cursor over the icons to display numerical values. This information can help with problem solving or when fine tuning the device. -
Page 21: Playback Page
Use the arrow buttons at the bottom to browse the list. To view tracks beginning from a particular time, enter the time code and click Get Tracks. Click a track. The playback for the selected sequence starts. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 22: Exporting Tracks
Click Start Search. The results are shown in the search results tab. Click a result to play it back. Click the search tab to enter a new search. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 23: Controlling Playback
Use the jog dial to quickly scan the sequences. The time code is displayed above it. The buttons have the following functions: Start/Pause playback Select the playback speed using the speed regulator AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... - Page 24 Jump to the following bookmark Bookmarks are only valid while in the Recordings page; they are not saved with the sequences. All bookmarks are deleted when you leave the page. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01...
-
Page 25: Settings Overview
You can access all device parameters in this mode. Settings that affect the fundamental functionality of the device (such as firmware updates) can only be changed in this mode. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 26: Settings
All settings are backed up in the device memory so they are not lost even if the power fails. The exception is the time settings, which are lost after 1 hour without power if no central time server is selected. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 27: Basic Mode
When assigning passwords, always start from the highest authorization level, service, and use different passwords. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... - Page 28 Re-enter the new password to ensure that there are no typing mistakes. The new password is only saved after clicking Set. Therefore, click Set immediately after entering and confirming the password, even if assigning a password at another level. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01...
-
Page 29: Date/Time
Select Time server if the server uses the RFC 868 protocol. Note: It is important that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 30: Network
Enter the appropriate subnet mask for the set IP address. Gateway address Enter the IP address of the gateway to establish a connection to a remote location in a different subnet. Otherwise, this field can remain empty (0.0.0.0). Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 31: Encoder
This page provides general information on the hardware and firmware system, including version numbers. No items can be changed on this page but they can be copied for information purposes when troubleshooting. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 32: Advanced General Settings
Initiator extension Add text to an initiator name to make identification easier in large iSCSI systems. This text is added to the initiator name, separated from it by a full stop. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 33: Password
Re-enter the new password to ensure that there are no typing mistakes. The new password is only saved after clicking Set. Therefore, click Set immediately after entering and confirming the password, even if assigning a password at another level. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 34: Date/Time
Note: If a table is not created, there is no automatic switching. When editing the table, note that values occur in linked pairs (DST start and end dates). Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 35: Time Server Ip Address
It is recommended to select the SNTP server protocol. This protocol provides high accuracy and is required for special applications and future function extensions. Select Time server if the server uses the RFC 868 protocol. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 36: Display Stamping
Custom option, or it can be set to Off for no overlay information. If the Custom option is selected, enter values in the X and Y position fields. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 37: Alarm Message
Select On in the drop-down box for the transmitted video images to be watermarked. After activation, all images are marked with an icon. The icon indicates if the sequence (live or saved) has been manipulated. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 38: Web Interface
7.1.5 Show VCA trajectories The trajectories (motion lines of objects) from the video content analysis are displayed in the live video image if a corresponding analysis type is activated. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 39: Show Overlay Icons
Select the player to be used for live mode viewing. 7.1.8 JPEG size, interval and quality Select the size, update interval and quality of the M-JPEG image displayed on the livepage. The highest quality is 1. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 40: Livepage Functions
Show system log The system messages are displayed with the date and time in a field next to the video image and provide information about the establishment and termination of connections, etc. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 41: Allow Snapshots
Path for JPEG and video files Enter the path for the storage location of individual images and video sequences saved from the Livepage. If necessary, click Browse... to find a suitable folder. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 42: Logging
File for system log Enter the path for saving the system log here. If necessary, click Browse... to find a suitable folder. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 43: Camera
Allow 5 seconds for the camera to optimize the picture after a mode reset. 8.1.9 Lens Wizard Click Lens Wizard... to open a separate window which can be used to focus the camera lens. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 44: Lens Wizard
The motorised automatic back focus process runs. – The focus position, state and indicator are shown. If necessary, manually adjust the focus position for day and night with the sliders. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 45: Mode Menu
It can also be used for industrial applications where fast moving objects are to be monitored. Motion artifacts are minimized. This mode should be optimized for a sharp and detailed picture in colour and black/white mode. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... - Page 46 Intelligent AE (BLC when IVA is unavailable) This mode is optimized for scenes with people moving in front of a bright background. Vibrant This mode has enhanced contrast, sharpness and saturation. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01...
-
Page 47: Color
+50 to offset the factory white point alignment (reducing blue introduces more yellow). It is only necessary to change the white point offset for special scene conditions. Default Click Default to set all video values to their factory setting. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 48: Alc
Select the shutter speed for fixed exposure: – 1/25, 1/30, 1/33, 1/40, 1/50, 1/60, 1/100, 1/120 1/250, 1/500, 1/1000, 1/2500, 1/5000, 1/7500, 1/15000 The values available depend on the value set for the ALC mode. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 49: Day/Night
A low (negative) value means that the camera switches to monochrome at a lower light level. A high (positive) value means that the camera switches to monochrome at a higher light level. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 50: Enhance
The higher the value, the more noise filtering. 8.6.6 Spatial noise filtering Adjusts the spatial noise filtering level between -15 and +15. The higher the value, the more noise filtering. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 51: Encoder Settings
Refer to Section 9.1 Encoder Profile, page 60 for more information on setting up the encoder profile. Refer to Section 9.3 Encoder Regions, page 66 for more information on setting up the encoder streams. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 52: Privacy Masks
Place the cursor inside the shaded box and drag to change its position. Click Freeze to stop updates of the live image. The number of pixels inside the selected area is displayed for streams 1 and 2. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 53: Encoder Settings
This can help in reducing the bit rate. For example, important objects can be selected to provide higher quality encoding than selected background areas. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 54: Encoder Profile
To change a profile, select it by clicking its tab, then change the parameters within that profile. If a setting outside the permitted range for a parameter is entered, the nearest valid value is substituted when the settings are saved. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 55: Profile Name
Expert Settings If necessary, use the expert settings to adapt the I-frame quality and the P-frame quality to specific requirements. The setting is based on the H.264 quantization parameter (QP). Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... - Page 56 Observe the coverage area during normal movement in the preview images. Set the value for Min. P-frame QP to the highest value at which the image quality still meets your needs. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems...
-
Page 57: Default
Select the appropriate encoding quality level for an object region defined in Encoder Regions. The lower the QP value, the higher the encoding quality. 9.1.9 Default Click Default to return the profile to the factory default values. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 58: Encoder Streams
Regions of Interest (ROI) If you select an ROI property for stream 2, you can set up a region of interest on the Livepage. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 59: Jpeg Stream
Select the Max. frame rate in images per second (IPS). – The Picture quality slider allows adjustment of the M-JPEG image quality from Low to High. Note: The M-JPEG frame rate can vary depending on system loading. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 60: Encoder Regions
Click Set to apply the region settings. Preview Click to open a viewing window where a 1:1 live image and the bit rate for the region settings can be previewed. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 61: Recording
The VRM is an external program for configuring recording tasks for video servers. For further information, contact your local customer service at Bosch Security Systems. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 62: Storage Management
If the iSCSI destination is password protected, enter the password into the Password field. Click Read. – The connection to the IP address is established. The Storage overview field displays the logical drives. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... - Page 63 The Storage overview field displays the local media. Note: SD card recording performance is highly dependent on the speed (class) and performance of the SD card. An SD card of Class 6 or higher is recommended. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01...
-
Page 64: Activating And Configuring Storage Media
If older recordings are not allowed to be overwritten when the available memory is full, the recording in question is stopped. Specify limitations for overwriting old recordings by configuring the retention time. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 65: Formatting Storage Media
It is then no longer used for recordings. Click a storage medium in the Managed storage media list to select it. Click Remove below the list. The storage medium is deactivated and removed from the list. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 66: Recording Profiles
Select the encoder profile setting that is to be used with stream 1 and 2 when recording. This selection is independent of the selection for live stream transmission. (The properties of the encoder profiles are defined on the Encoder Profile page.) AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 67: Recording Track Selection
– Off: no automatic recording takes place. Stream Select the stream to be used for standard recordings: – Stream 1 – Stream 2 – I-frames only Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 68: Alarm Recording
Enter the required retention time in hours or days for each recording track. Make sure that the retention time does not exceed the available recording capacity. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 69: Recording Scheduler
Assign the defined holidays to the recording profile as described above. Delete user-defined holidays as follows: Click Delete in the Holidays tab. A new window opens. Click the date to be deleted. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 70: Profile Names
Recordings that are currently running are interrupted and the configuration can be modified. 10.4.5 Recording status The graphic indicates the recording activity. An animated graphic is displayed when recording is taking place. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 71: Recording Status
Camera Browser Interface Recording | en 10.5 Recording Status Details of the recording status are displayed here for information. These settings cannot be changed. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 72: Alarm
Bosch Video Client or the Bosch Video Management System. The camera connects to all remote stations protected by the same general password. To define a... -
Page 73: Video Transmission
11.1.9 Decoder If a split image is set for the selected video output, select a decoder to display the alarm image. The decoder selected determines the position of the image. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 74: Ssl Encryption
Select On to automatically re-established a connection to one of the previously specified IP addresses after each reboot, connection breakdown, or network failure. 11.1.12 Audio Select On to transmit the audio stream with an alarm connection. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 75: Video Content Analyses (Vca)
This can lead to impairment of the VCA system. Observe the processor load and optimize the encoder settings or the VCA settings if necessary, or turn off VCA completely. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 76: Audio Alarm
Select On for the device to generate audio alarms. 11.3.2 Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the Bosch Video Client and the Bosch Video Management System. Enter a unique and clear name here. 11.3.3 Signal Ranges Exclude particular signal ranges in order to avoid false alarms. -
Page 77: Alarm E-Mail
Obtain information on operating your mobile phone from your mobile phone provider. 11.4.6 Image size Select the size of the JPEG images that are to be sent from the camera. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 78: Attach Jpeg From Camera
This makes it easier to identify the origin of the e-mail. 11.4.10 Test e-mail Click Send Now to test the e-mail function. An alarm e-mail is immediately created and sent. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 79: Alarm Task Editor
If the transfer was successful, the message Script successfully parsed. is displayed over the text field. If it was not successful, an error message is displayed with further information. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 80: Setting Up Vca
In this configuration, metadata is created to facilitate searches of recordings, however, no alarm is triggered. In the VCA configuration drop-down list, select Silent VCA. No parameters can be changed for this selection. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 81: Vca - Profiles
With the Motion+ analysis type, for example, the sensor fields in which motion is recorded are marked with rectangles. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 82: Motion Detector
This setting prevents objects that are too small from triggering an alarm. A minimum value of 4 is recommended. This value corresponds to four sensor fields. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 83: Tamper Detection
Reference check is selected. Sensitivity The basic sensitivity of the tamper detection can be adjusted for the environmental conditions to which the camera is subject. The algorithm reacts to the differences between the AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... - Page 84 Activate this function if tampering associated with covering the objective (for instance, by spraying paint on it) should trigger an alarm. The average brightness of the scene provides a basis for recognition. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01...
- Page 85 Selecting the area Select the image areas in the reference image that are to be monitored. The video image is subdivided into square fields. Activate or deactivate each of these fields individually. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems...
- Page 86 Right-click any fields to deactivate. Click OK to save the configuration. Click the close button (X) in the window title bar to close the window without saving the changes. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01...
-
Page 87: Vca - Scheduled
These will later be displayed as a single entry in the table. Click OK to accept the selection. The window closes. Assign the individual holidays to the VCA profiles, as described above. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... - Page 88 Click Delete. A new window opens. Click the date to delete. Click OK. The item is deleted from the table and the window closes. The process must be repeated for deleting additional days. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01...
-
Page 89: Vca - Event Triggered
A delay period may be useful in avoiding false alarms or frequent triggering. During the delay period, the Silent VCA configuration is always enabled. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 90: Interfaces
13.2.5 Trigger relay Click the button to switch the relay manually (for example, for testing purposes or to operate a door opener). Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 91: Com1
Stop bits Select the number of stop bits per character. 13.3.6 Parity check Select the type of parity check. 13.3.7 Interface mode Select the desired protocol for the serial interface. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 92: Network
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, activate acceptance of IP addresses automatically assigned to the device. Certain applications (Bosch Video Management System, Configuration Manager) use the IP address for the unique assignment of the device. If using these applications, the DHCP... -
Page 93: Ip V6 Address
Select a different HTTP browser port from the list if required. The default HTTP port is 80. To limit connection to HTTPS, deactivate the HTTP port. To do this, activate the Off option. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 94: Https Browser Port
This gives the option to adjust the size of the data packets to the network environment and to optimize data transmission. In UDP mode, comply with the MTU value set below. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 95: Iscsi Mss [Byte]
DynDNS server. Entries that change frequently are not provided in the Domain Name System. It is a good idea to force the registration when setting up the device for the first time. Only AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 96: Notification Mail
Select On to send a notification e-mail when the DynDNS IP address changes. Fill-in the e-mail address. 14.1.22 Status The status of the DynDNS function is displayed here for information purposes; these settings cannot be changed. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 97: Advanced
To choose which traps are sent: Click Select. A dialog box appears. Click the check boxes of the appropriate traps. Click Set to close the window and send all of the checked traps. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 98: Authentication (802.1X)
The priority of the different data channels can be set by defining the DiffServ Code Point (DSCP). Enter a number between 0 and 252 as a multiple of four. For alarm video you Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 99: Cloud-Based Services
Post Alarm Time over which this priority is maintained. 14.2.9 Cloud-based services The Mode determines how the camera communicates with the Bosch Cloud-based Security and Services. For more information about these sevices and their availability, visit: http://cloud.boschsecurity.com –... -
Page 100: Multicast
With a 0.0.0.0 setting, the encoder for the stream operates in multi-unicast mode (copying of data stream in device). The camera supports multi-unicast connections for up to five simultaneously connected receivers. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 101: Port
A value can be entered to specify how long the multicast data packets are active on the network. If multicast is to be run via a router, the value must be greater than 1. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 102: Image Posting
Enter the interval in seconds at which the images are sent to the target account. Enter zero for no images to be sent. Target Select the target account for JPEG posting. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 103: Face Detection
Select the type of image to be sent. Target Select the target account for best face posting. Maximum image width [px] Fill in the maximum image width in pixels. Leave at 0 for automatic width selection. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 104: Accounts
Enter an exact path to post the images on the account server. Click Browse... to browse to the required path. Maximum bit rate Enter the maximum bit rate in kbps that will be allowed when communicating with the account. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... -
Page 105: Ip V4 Filter
The device itself may initiate a connection (for example, to send an alarm) outside the defined ranges if it is configured to do so. 14.7 Encryption If an encryption license is installed, this submenu gives access to the encryption parameters. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 106: Service
This can result in the device no longer being addressable, requiring it to be replaced. 15.1.1 Update server The address of the Bosch update server appears in the address box. Click Check to make a connection to this server. Select the appropriate version for your camera to download the firmware from the server. -
Page 107: Configuration
Enter the full path of the file to upload or click Browse... to locate the file. Click Upload to start the file transfer. AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems... -
Page 108: Maintenance Log
Keep this information at hand when seeking technical support. Select the text on this page with a mouse and copy it so that it can be pasted into an e-mail if required. Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01... - Page 109 116 en | Service Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems...
- Page 111 Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2013...