Table of Contents
Advertisement
44
en | Camera
8
Camera
8.1
Installer Menu
8.1.1
Base frame rate
Select 50 ips or 60 ips as the base frame rate for the camera.
Note:
Shutter times and frame rates are affected by this value.
8.1.2
Camera LED
Disable the Camera LED on the camera to switch it off.
8.1.3
Mirror image
Select On to output a mirror image of the camera picture.
8.1.4
Flip image
Select On to output an upside down camera image.
8.1.5
Button 'MENU'
Select Disabled to prevent access to the install wizard via the
menu button on the camera itself.
8.1.6
Heater
(for dome cameras with heater only)
Select Auto to let the camera determine when the heater
should be switched on.
8.1.7
Reboot device
Click Reboot to restart the camera.
8.1.8
Factory defaults
Click Defaults to restore the factory defaults for the camera. A
confirmation screen appears. Allow 5 seconds for the camera to
optimize the picture after a mode reset.
8.1.9
Lens Wizard
Click Lens Wizard... to open a separate window which can be
used to focus the camera lens.
AM18-Q0635 | v5.6 | 2013.01
Software manual
Camera Browser Interface
Bosch Security Systems
Advertisement
Table of Contents
