Troubleshooting; Please Do Not Return This Product To The Store - Bissell AUTO CARE PROHEAT User Manual

T
roubleshooting
Reduced Spray or No Spray
Possible causes
1. Spray nozzle clogged
2. Clean/solution tank empty
3. Clean/solution tank insert clogged
4. Pump needs priming
Deep cleaner won't pick up cleaning solution
Possible causes
1. Tank release latch is not closed properly
2. Poor upholstery/carpet tool position
3. Dirty/collection tank is full
4. Upholstery/carpet tool brush worn
5. Excess solution in vacuum flex hose
6. Incorrect cleaning formula
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be
of service. Contact us directly at 1-800-263-2535.
w w w . b i s s e l l . c a
Remedies
1. Clean spray nozzle
2. Check/fill tank
3. Clean insert at bottom of clean/solution tank
4. Gently lift clean/solution tank while depressing
the spray trigger OR gently squeeze clean
tank while depressing spray trigger
Remedies
1. Lift up the tank release latch and press down
firmly to make sure it is in place
2. Reposition upholstery/carpet tool on surface,
follow recommended cleaning procedures
3. Empty dirty/collection tank
4. Replace with new brush
5. Lift tool and point upwards to allow water
in hose to flow into the dirty/collection tank
6. Use BISSELL portable formula only
8 0 0 . 2 6 3 . 2 5 3 5
9