Machine Storage; After Cleaning - Bissell AUTO CARE PROHEAT User Manual

M
aintenance and care

After cleaning

1. unplug power cord from outlet.
NOTE: If a significant amount of Little
Green formula/water remains, it is
all right to leave it in the clean/solu-
tion tank for your next cleaning task.
2. empty and rinse the dirty/collection
tank after each use, oR when dirty
water reaches the indicated maximum
fill line. to remove the tank, lift up the
dirty/collection tank release latch and
remove the tank from the unit.
3. disconnect the cleaning tool from the
spray trigger by pushing down on but-
ton lock and pulling straight off.
(do not twist tool to remove it)
4. once removed from the spray trigger,
clean tool by rinsing under running water.
5. check spray nozzle for accumulated
dirt or debris. if necessary, clean with
soft bristle brush.

Machine storage

1. Wipe all surfaces with a soft cloth.
2. Wrap power cord around the cord
wrap on the back of the auto care.
3. Wrap vacuum flex hose around the base
of the unit and secure the spray trigger.
4. store unit in protected, dry area, at
room temperature (40º to 110ºf).
8
w w w . b i s s e l l . c a
WARNING:
to reduce the risk of fire, electric
shock, or injury, turn power off
and disconnect plug from elec-
trical outlet before performing
maintenance or troubleshooting.
WARNING:
Keep spray away from face.
failure to do so may result in
personal injury.
8 0 0 . 2 6 3 . 2 5 3 5
tank
Release
latch