Summary of Contents for Bissell Auto Care Proheat 1425 SERIES
Page 1
Auto Care Proheat ® COMPAC T D E EP CL EAN E R U S E R ’ S G U I D E 1425 Series Thanks/Consumer Services Safety Instructions Product View This Guide/Features 6–8 Special Tools/Assembly 6–8 Operation Clean-Up/Storage 8–9 Troubleshooting Replacement Parts...
Page 2
BISSELL Auto Care Proheat® We’re glad you purchased a BISSELL Auto Care Proheat®. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your Auto Care Proheat® is well made, and we back it with a limited one- year warranty.
Do not modify the 3-prong grounded plug. ■ Do not use for any purpose other than described ■ in this User’s Guide. SAVE THESE Use only BISSELL cleaning products intended ■ for use in this appliance. INSTRUCTIONS Use only manufacturer’s recommended attach- ■...
Familiarize yourself with the parts and where they go. uto Care Proheat® Product Features following this User’s Guide will let you get the best performance from your BISSELL Auto Care Proheat® for many years. Clean/Solution Tank The Clean/Solution Tank is the tank to your left as you face the unit looking at the black power switch.
WARNING: OR if the extension cord does not have a three-prong grounding plug Use only BISSELL compact clean- and if the extension cord is not ing formulas in your cleaner. Use plugged into a circuit box with a of cleaning formulas which con- ground fault circuit interrupter.
B. Unscrew the black cap at the bottom of the Clean/Solution Tank. C. Add BISSELL Auto Cleansing Formula to the FORMULA fill line (8 oz.) on the Clean/Solution Tank. Fill the Clean/Solution Tank with hot (NOT boiling) tap water to the WATER fill line.
leaning with your Auto Care Proheat® Hold the tool approximately 1” (2.5 cm) above the soiled surface. Press the Spray Trigger to apply the cleaning solution to the soiled area. Using the brush on the tool, gently scrub the area to be cleaned.
fter Cleaning (continued) Disconnect the cleaning tool from the Spray Trigger by pushing down on button lock and pull- ing straight off (Do NOT twist tools to remove them) Once removed from the Spray Trigger, all tools can be cleaned by rinsing under clean running water.
Thank you for selecting a BISSELL product. Please do not return this product to the store for any question or concern, BISSELL is happy to be of service. Contact us directly at, 1-800-263-2535 w w w . b i s s e l l . c a...
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product, BISSELL Canada Corporation will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part.