Advertisement
Ultra Bar 9
The ADJ RFC remote (sold seperately) has many different functions and al-
lows you to control your Ultra Bar 9 from long distance. The ADJ RFC remote
can control your system up to 150 ft. To use the RFC you must first activate
the fixtures receiver, to activate the receiver please see the instructions on
page 10.
BLACKOUT - Pressing this button will blackout the fixture. Press this button
for more then 3 seconds to activate default running mode. All modes will re-
turn to their default settings.
AUTO RUN - This button will run an automatic program. You can control the
fade speed of the Auto Run by pressing the Flash button twice and then ad-
just the speed using the "+" and "-" buttons. Press the Flash button once to
enter Flash mode and use the "+" and "-" buttons to adjust the Flash speed.
PROGRAM SELECTION - This button will activate 1 of 2 modes; Color Select
mode or Built-In Programs.
1. Press this button to activate Color Static mode. Use the "+" or "-" to scroll
through the 35 colors. Once you have found your color, you can press the
Flash Button to activate strobing and use the "+" or "-" to adjust the Flash
rate.
2. Press this button to enter Built-In Program mode. Use the "+" or "-" to scroll
through the 22 built-in programs. Once you have found your desired program
and you can press the SPEED button and then use the "+" and "-" buttons to
adjust the program speed. You can press the Flash Button to activate strob-
ing and use the "+" or "-" to adjust the Flash rate. Press the Flash button twice
to enter the Fade speed adjustment and use the "+" and "-" buttons to adjust
the Fade speed.
FLASH - This button will activate the flash (strobe) effect. You can control the
flash speed by pressing the "+" and "-" buttons. Pressing this button again
will activate fade mode (if available). You can adjust the fade speed by press-
ing the "+" and "-" buttons.
SPEED - Press this button and use the "+" & "-" buttons to adjust the speed
of the Built-In Programs.
SOUND ACTIVE - This button activates sound active mode. Use the "+" & "-"
buttons to adjust the sound sensitivity level.
R G B - Press either one of these buttons and the press the "+" or "-" to ad-
just the brightness.
"+" and "-" - Use these buttons to adjust the flash rate, speed of the Auto
Run and built in programs, fade speed, sound sensitivity, and output intensity.
Use these buttons to scroll through the static colors and built-In programs.
ADJ Products, LLC - www.adj.com - Ultra Bar 9 User Manual Page 12
ADJ RFC Operation
Ultra Bar 9
Channel
Value
1
0 - 255
2
0 - 255
3
0 - 255
Ultra Bar 9
Channel
Value
1
0 - 255
2
0 - 255
3
0 - 255
4
0 - 15
16 - 255
5
0 - 255
ADJ Products, LLC - www.adj.com - Ultra Bar 9 User Manual Page 13
3 Channel Mode
Function
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
5 Channel Mode
Function
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
STROBING
NOTHING
STROBING SLOW - FAST
MASTER DIMMER
0% - 100%
Advertisement
