Baxi Bioflo Installation & Servicing Instructions Manual page 19

For the Installer
– Screw on the gas springs for BAXI Bioflo with manual filling (Fig. 15)
– Take pressure gauge provided out of ash pan and screw into shut-off valve at front – Fig. 16.
BAXI Bioflo with manual filling
Gas spring
Fig. 15 Screwing on gas springs
– Secure the "left side panel" (part 2) to the boiler at the rear using 3 screws – Fig. 17 and front using 2 screws
– Fig. 18.
Fig. 17 Screwing the side panel on at
the rear at 3 points
– Secure the "front cover plate" (part 3) onto the side panel using 2 screws – Fig. 19
– Secure the "right side panel" (part 6) to the boiler at the rear using 3 screws, at the front using 2 screws and
screw onto the "front cover plate" (part 3) – Fig. 20.
Fig. 19 Screwing the front cover plate on at
the front at 2 points
Fig. 16 Screwing pressure gauge into shut-off valve
Fig. 18 Screwing the side panel on at
the front at 2 points
Fig. 20 Mounting the right side panel in the
same way as the left side panel
19