Monitor Setup; Adjusting Picture; Visual Eq Operation; Adjusting The Brightness - Alpine PKG-2000P Owner's Manual

Monitor Setup

Adjusting Picture

Visual EQ, Brightness, color, tint, contrast and sharpness are
adjustable.
• Each source is independently adjustable.
• Make adjustments within 6 seconds, otherwise the OSD (On Screen
Display) will turn off automatically.
• After adjusting, the "OFF" setting in Visual EQ changes to
"CUSTOM". After resetting the unit, "CUSTOM" changes back to
"OFF"
1
Press SETUP button on the remote control.
Or press and hold the SELECT button on the Front
Control Keys for at least 2 seconds to open SETUP
screen. The PICTURE setting menu is highlighted.
SELECT

VISUAL EQ Operation

You can select a mode suitable for the subject image.
2
To change VISUAL EQ, press
through the OSD as OFF, NIGHT MOVIE, SOFT,
SHARP and HIGH CONT. (Default: OFF)
VISUAL EQ mode (manufacturer's settings) selection
(VISUAL EQ MODE)
OFF: Normal Setting (Visual EQ OFF)
NIGHT MOVIE: Suitable for movies in which dark
scenes frequently appear.
SOFT: Suitable for CGs and animated
fi lms.
SHARP: Suitable for old movies where
images are not clearly shown.
HIGH CONT.: Suitable for recent movies.
• "OFF" will change to "CUSTOM", when any of the picture
• NIGHT MOVIE, SOFT, SHARP and HIGH CONT. are fi xed values.
• To return OFF mode, press RESET on the picture mode, or change
3

Adjusting the Brightness

2
3
Front Control Keys
4
SETUP

Adjusting the Color Density

Remote Control
2
3
or to cycle
4
mode (Brightness, Color, Tint, Contrast and Sharpness) has been
adjusted
They cannot be set manually. If the picture mode is changed, they
automatically change to CUSTOM mode.
values of BRIGHT, COLOR, TINT, CONTRAST and SHARPNESS
to 0 manually.
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Press or and select BRIGHT.
Press or to adjust the brightness. Brightness
can be adjusted from –15 (MIN) to +15 (MAX).
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Press or and select COLOR.
Press or to adjust the color density. Change
depth can be adjusted from –15 (MIN) to +15 (MAX).
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
17
-EN