Mac Os9 - M-Audio OmniStudio USB User Manual

Mac OS9

NOTE: Before installing the OmniStudio USB under OS9, you will need to install OMS if you have not already done so. Please
refer to the section on installing and setting up OMS below for more information.
Insert the M-Audio driver CD into your CD-ROM drive and open the CD to view its contents. Double click on the OmniStudio USB folder to
open the installer.
When your computer has restarted, connect the OmniStudio USB to your computer's USB port and power it on.
Under Control Panels, select Sound, then select the Output tab. Click on M-Audio OmniStudio USB to select OmniStudio USB as your default
audio device.
ASIO Driver Installation: When you execute the Omnistudio USB Installer under OS 9, it installs the necessary extensions into the Extensions
Folder. It also installs the OmniStudio USB's MIDI drivers into the OMS folder, assuming you have already installed OMS. And finally, it installs
the OmniStudio USB's ASIO drivers in every installed application's ASIO Drivers folder. (If you have renamed your ASIO folders or moved them
to where the installer can't find them, the installer will place an M-Audio Omnistudio USB ASIO icon on your desktop. When you open your
audio application, the OmniStudio USB's ASIO I/O should be available in the audio devices menu.
Double click on the "M-Audio OmniStudio USB Installer" icon. An icon labeled OMNISTUDIO USB
will appear on your desktop.
Double click on the OmniStudio USB icon. The file M-Audio OmniStudio USB Installer.mpkg will
appear. Double click on the installer file.
Click "Continue" in the M-Powered screen.
Read the instructions screen, then click "Continue."
The installer will copy the necessary files to your system drive. You will be prompted to restart your
computer. Click "restart."
24