Mac Os 9 - M-Audio Revolution 5.1 User Manual

6. The Found New Hardware Wizard will automatically pull the drivers from the
Drivers CD-ROM. Click "Finish" to complete the installation.
Revolution 5.1 and the Windows Sound System (2000, Me & 98SE)
The Revolution 5.1's Windows Multimedia drivers will allow you to use the Revolution 5.1
as your Windows system sound device. If the Revolution 5.1 is the only audio device
installed in your computer, then Windows will "select" it automatically. Otherwise, you
may need to tell Windows to use the Revolution 5.1. To check your Windows Audio
setting and select the M-Audio Revolution 5.1:
1. Go to the Start menu, and then choose "Control Panel."
2. Open "Sounds and Multimedia" (on Windows Me and 2000) or "Multimedia" (on
Windows 98SE), then click the "Audio" tab.
3. Under "Sound Playback," the default device should say "Revolution." If it does
not, then drop down the list of devices and select "Revolution."
4. Click "Apply," then click "OK." Close your Control Panel to complete the process.

Mac OS 9

1. Refer to the next section, "Hardware Installation" to first install the hardware.
After installing the hardware, insert the Revolution 5.1 Driver CD into your CD-
ROM drive. Double-Click the CD icon to view its contents.
2. Double click the "Revo 5.1 Installer."
3 Click "Continue" when prompted.
4. You can "Save" or "Print" the ReadMe file. Then click "Continue".
11