Windowsme - M-Audio OmniStudio USB User Manual

WindowsME

Do NOT connect the OmniStudio USB to your computer's USB port at this time.
Insert the M-Audio driver CD-ROM into your computer. From the Start menu, select "Run..." then click the Browse button. Browse to the CD
drive and double-click the OmniStudio USB folder to open it. Click on the Setup.EXE icon to begin the installation.
The M-Audio OmniStudio USB Installer screen will appear, asking you to confirm that you wish to install
OmniStudio USB. Click Next to continue.
The installer will begin to copy the OmniStudio USB files to your computer's hard drive.
During the driver installation, the CD Performance Enhancements screen will appear. By default, the
performance enhancement settings for CD and DVD playback will be selected. It is recommended you
leave them selected unless you are certain that your hardware is incompatible with these settings.
Once the installer has finished copying the files, you will see the "Installation Complete" screen.
You will be prompted to restart your computer. Click Finish and your computer will reboot.
On rebooting, the M-Audio OmniStudio USB Control Panel icon will appear in the system tray.
18