Features And Technical Features; System Requirements; Windows; Mac Os - M-Audio ProjectMix I/O User Manual

Features and Technical Features

Eight low-noise mic/instrument preamps with gain controls, signal and peak LED metering, phantom power and 66dB of available
<
gain
Eight XLR inputs
<
Eight analog inputs and four analog outputs on 1/4" TRS jacks
<
S/PDIF I/O on TOSLink optical or RCA coaxial connectors
<
Supports sampling rates from 44.1kHz to 96kHz
<
Two headphone outputs with selectable source and A/B controls
<
Software-assigned rotary encoder knobs for tactile control of monitor levels
<
1 x 1 MIDI I/O
<

System Requirements

Important: The ProjectMix I/O is supported under Windows XP with Service Pack 2 or later. It is not supported under Windows 2000, Windows 98
or Windows Me. Visit the Windows update web pages to make certain you have the most current updates and fixes supplied by Microsoft.
On the Mac, the ProjectMix I/O is supported under Mac OS X version 10.3.9 or later. Earlier versions of Mac operating systems are not
supported.

Windows

Pentium 3 – 800MHz or higher (may be higher for laptops)
<
512 MB RAM
<
Windows XP (SP2)
<
DirectX 9.0c or higher
<
Available FireWire port or FireWire expansion card
<

Mac OS

Macintosh G3 800MHz or G4 733MHz higher (may be higher for laptops)
<
512MB RAM
<
Mac OS X 10.3.9 / 10.4.21
<
Available FireWire port or FireWire expansion card
<
*G3/G4 accelerator cards not supported
Before you begin, please confirm that your computer meets or exceeds all of the specifications listed above. If your computer does not meet
all of these requirements, the ProjectMix I/O may not function properly (or at all) with it. We also recommend that you check the minimum
requirements of your DAW software as they may be higher.
4 Features and Technical Features • System Requirements